Welcome to our telecom fasteners at AnyFab. We offer a vast selection of high-quality fasteners designed to meet the specific needs of telecom infrastructure projects.
Our fasteners are made from galvanised steel and stainless steel, ensuring long-lasting performance and reliable installations.
Whether you require full nuts, set screws, dome head bolts, or specialised fasteners like U bolts and V bolts, we have everything you need. Our fastener range meets industry standards and offers options for mounting, fixing, and securing telecom equipment.
Browse through our collection of fasteners below.
Chemical Anchor Bolts
Chemical capsules contain polyester resin and quartz granules. Plus a phial hardener/ Studs have shaped tips to ensure thorough mixing of the adhesive when driven into the capsule with a suitable power tool. The capsule and phial are crushed and mixed in the hole and the contents form a resinous mortar.
Bolts and Capsules supplied in packs of 10
Resin Anchor Cartridge
Suitable for fixing studs, bolts and wall ties in a wide range of substrates such as concrete, brickwork, masonry and stone. Advantages are expansion free anchoring, fits standard coaxial applicator and open cartridges can be re-used at a later date if a new nozzle is used.
*brands are subject to availability at the time of order.
Masonry Anchor Bolts
Electroplated zinc finish to BS 1706 Class C (ZA2). Masonry Drill Bits in ‘Tools’ section. Suitable for concrete and most types of masonry. Ideal for overhead and ceiling work. For wall fixing, provides a stud on which to hang the fixture during installation. For fixing where the bolt needs to be inserted after the shield has been positioned, e.g. installing heavy equipment or machinery.
Through Bolts
For fixing into concrete. Through Bolt requires a hole the same diameter as the bolt This may be drilled through the prepositioned fixture, so removing the need for marking out. The Through Bolt is a cost-effective economy anchor, combining good load-carrying characteristics with ease of fitting. For use in concrete only if the minimum strength is 20 N/mm2. *Partial F.O.S 1.4.
Technical Information is for guidance only
Set Screws
All spun galvanized to BS 7371. Sets Grade 8.8, Nuts Grade 10. All dimensions are in millimetres. Supplied with 1 Full Nut, 1 Form E Flat Washer and 1 Spring Washer .
Bolt assembled with nut and flat washer only, spring washer supplied loose. BS 3692-DIN933
Structural 2D+6 Bolts
All spun galvanized to BS 7371. Bolt Grade 8.8, Nut Grade 10. DIN 931.
All dimensions are in millimetres. Supplied with 1 Full Nut, 1 Form E Flat Washer and 1 Spring Washer.
Dome Head Bolts
BS 3692 DIN601. Mild Steel Grade 4.6. Finish Spun Galvanized to BS 7371. Fully Threaded.
Supplied with 1 Full Nut, 1 Form E Flat Washer and 1 Spring Washer.
Fasteners - Full Nut
Full nuts – taped oversize. Spring washers – form A All spun galvanized to BS 7371
Fasteners - Half Nut
Galvanised to BS 7371.
Half nuts - tapped oversize. Spring washers - form A. All spun.
Spring Washer
All spun galvanised to BS 7371.
Spring washers – form A.
Taper Washer
All spun galvanised to BS 7371
Flat Washer Form E
All spun galvanised to BS 7371
Flat Washer Form F
All spun galvanised to BS 7371
Flat Washer Form G
All spun galvanised to BS 7371.
Round Pack Washer
All spun galvanised to BS 7371.
Square Pack Washer
All spun galvanised to BS 7371.
Standard Studding
Galvanised to BS 7371.
Grade 8.8. Standard length 1mtr but can cut to length if required.
Stud Kits
Galvanised to BS 7371.
Grade 8.8. Pack of 10 studs, 30 nuts, 20 flats and 20 springs. Standard sizes but can supply most sizes.
Stainless Steel Sets
Stainless Steel Grade A2.
M6,M8 and M10. Fully threaded.
Nylon Fibre Washers
Stainless Steel Fasteners Grade A2.
Stainless Steel Studs - Full Length
Standard Stock Lengths. Grade A2—304.
Machine cut to length-no burrs Other lengths available to order.
Stainless Steel Studs
Standard Stock Lengths. Grade A2—304.
Machine cut to length-no burrs Other lengths available to order.
U Bolts M10
Finish = Spun Galvanised to BS 7371. Mild Steel Bolt Grade 43A.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers. For Stainless Steel, suffix the part number with SS e.g. 2/UB/010/SS.
U Bolts M12
Finish = Spun Galvanised to BS 7371. Mild Steel Bolt Grade 43A HT = High Tensile Bolt Grade EN16T.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers. For Stainless Steel, suffix the part number with SS e.g. 2/UB/010/SS.
U Bolts M16
Finish = Spun Galvanised to BS 7371. MS = Mild Steel Bolt Grade 43A. HT = High Tensile Bolt Grade EN16T.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers.
N Bolts M10
Finish = Spun Galvanised to BS 7371. Mild Steel Bolt Grade 43A.
Each Supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers
N Bolts M12 Equal Angle
Finish = Spun Galvanised to BS 7371. MS = Mild Steel Bolt Grade 43A HT = High Tensile Bolt Grade EN16T.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers.
N Bolts M12 Unequal Angle
Finish = Spun Galvanised to BS 7371. MS = Mild Steel Bolt Grade 43A HT = High Tensile Bolt Grade EN16T.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers.
N Bolts M16
Finish = Spun Galvanised to BS 7371. MS = Mild Steel Bolt Grade 43A HT = High Tensile Bolt Grade EN16T.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers.
Square Bolt M12
Finish = Spun Galvanized to BS 7371. MS = Mild Steel Bolt grade 43A to BS4360. HT =High Tensile Bolt Grade EN16T.
All dimensions are in millimetres. Cut threads. Supplied with 2 full nuts, 2 flat washers and 2 spring washers.
Unequal Square Bolt M12
Finish = Spun Galvanised to BS 7371. MS = Mild Steel Bolt Grade 43A. HT = High Tensile Bolt Grade EN16T.
Each is supplied with 4 Full Nuts, 2 Flat Washers and 2 Spring Washers.
V Bolt
Finish = Spun Galvanized to BS 7371. MS = Mild Steel Bolt Grade 43A. HT = High Tensile Bolt Grade EN16T.
Supplied with 2 full nuts, 2 flat washers and 2 spring washers.
Hook Bolt
Finish = Spun Galvanized to BS 7371. 2/HB/001 Material Stainless Steel Grade 303. 2/HB/002 - 2/HB/011. Material Mild Steel Grade 43A to BS 4360.
All dimensions in millimetres Cut threads Supplied with 2 Full Nuts, 1 Flat Washer and 1 Spring Washer Stainless Steel Bolts fabricated to order.